Advantages of composite woodsuperadmin
What are the advantages of composite wood?
What’s composite wood?
The Advantages of composite premium bond wood design include the following:
Fire and flame resistant
Too late and if there is too much heat on a high level, it will ignite very little.
In some cases, the flame is extinguished very quickly and automatically.
Its formulation is based on the possibility of recycling in nature.
Our products are completely decomposed in nature and do not leave toxic and destructive substances.
Due to the very low absorption of water, they do not freeze on the surface of the ice and do not cause cracks or fractures.
Resistant to insects and fungi
The presence of polymers and minerals protects insects and termites from bites.
It also has natural additives that prevent the growth of fungi inside the products.
It has nano-nanocomposite particles
Due to its nanoparticles, which are layered with advanced technology in its polymer substrate, it has more physical strength and durability than conventional plastic wood composites.
Unlike natural wood, the composite design of premium bond wood is without chips and sharp in the cut parts and does not cause injuries.
Therefore, this feature brings ease of use by the consumer and even ease of installation.
Easy to install
Even inexperienced people can easily install according to the instructions provided.
The side grooves of the profiles or the crotch system and the use of existing clips make installation very easy. In fact, you can use the same tool used for wood or MDF.
Suitable for families
It is a product that all family members can use with peace of mind and comfort. It is very safe because it does not contain harmful substances for humans or nature.
If the conductor is dry, there is no electricity. Therefore, it can be used safely in residential conditions and environments.
It is much more economical than similar products. Even due to the lack of special storage conditions such as special and periodic coatings, maintenance costs are much lower. Due to the use of recycled materials in its formulation, it is not only cheaper but also provides the environment for cleanliness and preservation of trees.
No toxic substances
Advanced formulations do not use any toxic or harmful substances. The result is easy to use and safe, even for children.
Protecting the environment and trees is an integral part of human life for survival. Maximum recycled raw materials are used for production. The polymer is removed from the waste and the wood powder is supplied from the extracted chip of the cutting industry or so on. It is worth noting that it is not cut to produce a single tree.
Although the density is about 1.3 grams per cubic centimeter, the production of extrusion brushes and hollow section design compensates for this shortcoming and brings light weight.
Various cross-sectional designs
Unlike natural wood, it can be produced with thousands of different designs, both hollow and solid, or even complex designs.
Paint on the surface and paint in depth
Paint is also used in formulations as a product to add oxidation and harmful rays to the sun, as well as for aesthetic appearance. However, it is important to note that the color in the Nextro is not superficial. If the surface is damaged, the color inside the product is the same as the surface.
It should be noted that natural wood turns gray due to the presence of lignin in it, which is broken down by harmful harmful rays. This issue, which is an integral part of the characteristics of natural wood, is also reflected in Iranian composites due to the presence of natural wood particles, and that is paleness.
However, this value is negligible in Nextro due to the presence of a maximum of 40% of the second wood powder due to the small particles of about 250 microns and the third due to the protective substances against the harmful rays of sunlight. Therefore, paleness, which can be detected with the naked eye, is created only on the surface and stabilizes after a maximum of 6 months.
Leave a Reply