13 tips of aluminum composite facade

tips of aluminum composite

Composite facade substructure

1- The substructure of the composite facade should be done using a suitable profile (40 * 40 cans).

2. The cans should be completely on the map of the composite facade.

3- All connections should be checked in the execution of the composite facade and it should have a suitable weld with a dimension of five millimeters.

4- Do not remove the labels on the sheets until the completion of the composite facade operation.

5. Transverse and height profiles as well as gloves should be precisely aligned and pliable.

6- If there is a large distance between the facade of the building and the main wall of the building
The length of the gloves increases
And the appropriate size gloves should be used with the calculated connections.

7- Necessary care should be taken so that after the completion of the composite facade, the sheets are connected
And do not have step-by-step mode
Also, keep the grooves in one direction.

Buy composite sheets

8- Before buying the sheets used in the composite facade, be sure to consult with the experts in this field
So that the environmental conditions of the implementation are involved in purchasing the sheets and installing them.

9- In composite facade execution, use a sheet with a thickness of at least 4 mm (half a millimeter thickness of each layer of aluminum and 3 mm thickness of the middle core).
In designing the composite facade, it is very important to choose the location of the seams
Because it has a significant effect on the amount of waste
This should be calculated according to the dimensions of the sheet.

10. Composite facade sheets produced in each factory have special dimensions. Care should be taken to design the composite facade according to the dimensions of the sheets.

11- Cutting in the ears of the components of the composite facade sheets should be such that the seam does not fall in the corner because the parts do not weld together after bending and the remaining seams in addition to the ugly appearance also cause water absorption.

12- In case of sealing composite facades, this operation should be done using silicone glue and complete and precise sealing tires.

13. To prevent corrosion between iron and aluminum, use dielectric rubber.